60 641# Smoke sensor detector xd20 230v

60 641# Smoke sensor detector xd20 230v - description

DEVICE TEST
NOTE!!! In order to maintain the efficient operation of the device, the device should undergo regular inspections and be regularly tested!
SELECTION OF INSTALLATION LOCATION
In order to ensure the maximum level of protection, it is recommended to install the device in all rooms and on each level of the residential building (both where there are devices or installations that may be a potential source of fire and also in other rooms).
DEVICE USEFULNESS PERIOD
The average useful life of the device (electronic sensor) is about 5 years. This time is strictly dependent on the environmental conditions in which the device was working, date of production, number of alarm activations, etc.) It is recommended to regularly replace worn-out models with new ones. SAFETY ADVICE
To minimize the risk of fire, have the heating system, ventilation system, chimneys and exhaust fumes from fuel-fired appliances checked regularly (at least once every six months) by qualified specialists. All heating appliances should always be installed in accordance with the manufacturer's recommendations and local building regulations should be followed. All appliances should be installed and checked by specialists after installation. The connections of fuel supply pipes or exhaust pipes should be checked regularly for any leaks, cracks, traces of rust, etc. It is essential that all household members are familiar with the alarm devices used in the installation. ACTIVATION OF THE ALARM
When the alarm is triggered, you must:- IMPORTANTLY LEAVE THE SMOKED ROOM IN WHICH THE ALARM WAS TRIGGERED- Contact the Fire Department or Police- If you notice any symptoms of poisoning (e.g. headache) in yourself or any household member, you must contact a doctor- In the event of a false alarm, check the correctness of the installation and the selection of the installation location of the deviceDEVICE FEATURES- High-quality photoelectric sensor
- Powered by 230V 50Hz mains, in the event of a power outage, the device is powered by a 6LR61 9V battery- Alarm signaling with sound and visual indicator- Built-in function for testing the unit's electronics and verifying the correct operation of the device and resetting the device during an alarm.- Signaling the need to replace the battery (sound signal cyclically repeated at regular intervals - approx. 40 seconds)- Energy saving function- Highly effective SPECIFICATION- Power supply: 230V AC / emergency 6LR61 9V battery (battery included)- Sensor type: photoelectric- Current consumption in standby mode: >10uA- Current consumption in alarm mode: >10mA- Volume: >80 dB- Permissible ambient temperature: -10stC ~ 50stC- Permissible ambient humidity: 10% ~ 90% R.H.

---

Payment options

• Bank transfer

---

Delivery options

• National delivery
• International delivery

---

Shipping to countries