AG538B WINDOW REPAIR KIT

AG538B WINDOW REPAIR KIT - description

A kit to repair damage to car windows. Get rid of ugly spider veins from the glass and protect the chips from further widening.
Product features:

Brand new, high quality product.
With this kit you can repair the windshield in your car yourself. You can easily and quickly get rid of chipping caused most often by stone impacts from under the wheels of other cars.
Chips and deep scratches resulting from cracks will become almost invisible, and the glass will be protected against further enlargement of the damage.
Suitable for repairing damage to glass in the shape of small meshes, once longitudinal cracks not longer than 15 cm.
Thanks to the large amount of glue in the kit, the set is suitable for reusable use.
It pays off at the first use, the cost of repairing them many times lower than in authorized car services.
Quick effect - the whole procedure of glue application takes a few minutes, and the adhesive itself dries within 10 minutes of exposure to sunlight (UV glue).

USER MANUAL EN:
Before starting work, clean and degrease the glass on both sides. It is also necessary to remove any glass residues in the form of chips and small crumbs.

Place the applicator with a screw (piston) over the crack so that the tip of the applicator is in touch a little more tightly with the center of the crack, then remove the plunger from the applicator.
Place the right amount of glue in the applicator (depending on the size of the crack). Usually 5-10 drops are enough for smaller damage (4-7 mm in diameter).
Screw the plunger into the applicator until it stops, then unscrew and screw in again (preferably several times) the plunger in the applicator, so that the glue can get into as many nooks and crannies as possible while pushing air out of the damage. By screwing in the piston, observe whether the glue spreads in the damage, completely filling it. If necessary, add another portion of glue. The glue should completely fill the damage.
Remove the plunger from the applicator.
Wait for the vacuum to suck the air out from under the applicator.
Screw the plunger back in until it stops. Make sure the damage is completely filled.
Remove the plunger and applicator.
Apply 2 drops of glue to the sealed damage and cover the protective foil by ironing it gently so that no air bubbles remain under it.
Expose for 10 minutes to the sun or irradiate with a UV lamp. The adhesive curing process occurs only under the influence of UV radiation.
Scrape off excess glue with the included razor blade (with quick, gentle movements at an angle of 90°, without worrying about scratching the glass).
In the case of a longer longitudinal crack, apply the adhesive along the crack (without using an applicator) and then line the entire length of the crack with protective film. Next, follow the previous instructions.
In case of possible shortcomings in gluing, the procedure should be repeated.

Included:

Filling resin 2,5 ml
Resin (glue) applicator
Razor blade
Cleaning cloth
3x O-Ring
3x silicone sealant
5x curing foil
Syringe

We invite you to place an order!

---

Payment options

• Bank transfer
• Cash

---

Delivery options

• Collection in person
• National delivery
• International delivery