Glue for PP and PE 4g 4ml Technicqll

Glue for PP and PE 4g 4ml Technicqll - description

Glue for PP and PE 4g+4ml Technicqll
Designed for bonding all materials, both flexible and hard, with smooth and porous surfaces. Including polyethylene PE and polypropylene PP, and even PTFE Teflon. This product consists of a new generation of cyanoacrylate gel glue and a base – PRIMER designed for preparing surfaces before bonding polyolefins – materials that are difficult to bond – PP, PE.
Features:
- high activity of glue and primer
- packaging with a brush
- flexible glue
- high bonding speed
Benefits:
- strong bonding of plastic elements
- precise application of glue, low glue consumption
- capability of bonding materials with different properties
- short repair time
Application:
Bonding plastics with low surface energy: polyolefins (PE, PP), PTFE, silicone rubbers. Also intended for bonding: metal, rubber, wood, ceramics, cement, hard plastics, glass, leather, plywood, aluminum. Bonds hard and flexible materials. Also used for bonding metal combinations “metal + rubber, plastics + rubber, paper + plywood + glass, etc.
Specifications:
- Viscosity: gel
- Shear strength: min. 3.0 MPa
- Max. gap to fill: 0.25 mm
- Temperature range: -55°C to 80°C
- Shelf life: 12 months
Method of use:
- Clean and roughen the bonded elements.
- Degrease the surface (P-102 or P-959 Technical Degreaser). Surfaces should be clean and free of contaminants.
- Apply a thin, even layer of primer “BASE” to the bonded surfaces.
- Wait 2-3 minutes.
- Apply a thin, even layer of glue to one of the surfaces (the less glue, the stronger the bond).
- Immediately connect the elements, press, and hold for a few seconds.
- Do not move or adjust the connection.

---

Payment options

• Bank transfer

---

Delivery options

• National delivery
• International delivery

---

Shipping to countries